Microsoft Windows 7 Ultimate X86 Preactivated Genuine Mu Lin

Microsoft Windows 7 ULTIMATE x86 PREACTIVATED GENUINE MU LIN

Microsoft Windows 7 ULTIMATE x86
no serial and no activation needed!!!

so far there have been more than 2000 downloads of this, and 3 complaints all in all, at least 2 of those have solved their problems, which had nothing to do with the image. i have installed this on 3 of the puters in my own network (clean installs), which went without any problem at all. even drivers are updated and installed, including motherboard drivers and graphic cards.

note: if it seems to “hang” after installtion has started, give it some time (some guys have reported 10, 15, 20 minutes). mine took about 5 minutes before it continued.

should you upgrade instead of clean install? no, you shouldnt. the reason for this is Murphyes Law. i would never install a new OS as an upgrade on to an existing system that i use daly. i base that on more than 20 years of (daily – as a puter & network technician) experiance with Microsoft and puters in general.

Extract Files
Burn Image to DVD
Boot from DVD
Install without serial

- Download and extract using WinRAR.
- Use NERO to burn the ISO image called “faXcooL.Windows.7.Seven.RTM.7600.ENG.FiNAL.ALL.ED iTiONS.x86-x64″
- Burning speed should not be faster than 4x. Otherwise, it might not work.
- Restart your computer.
- Make sure you’ve seleceted your DVD-ROM/RW drive as a first boot device
* Enter the BIOS pressing the DEL button, set the option, insert your Windows 7 installation and restart computer.
- The black screen will appear (image 01).
- Press any key to boot from CD or DVD…. (by pressing the key you’re entering the setup)
- Select your language, time and currency and keyboard input (optionaly)
- Click install now
- Choose your Windows version
*Ultimate is most complete so I would suggest it. Choose x64 if you have 64-bit processor.
- Click “I accept”.
- Click “Custom (advanced).
- Choose your partition/hdd drive where Win7 should be installed and click format.
*You might get some error if you have two or more hard disks with different connectors (ATA and SATA).
If you get an error, turn off one of your hard disks and repeat the whole proces.
- After formatting, setup will continue automaticly and it will finish after 15-30 min.
- Next step would be username (Image 17).
- Type your password (if you want).
- When you get the screen for CD-KEY just ignore it leaving blank.
*Uncheck the box for automaticly activation and click next.
- Choose the third option for next step.
- Select your time zone.
- Select your current location (Home is recommended).
- And that would be all about installation. You’re in Windows now.

DOWNLOADS

http://www.megaupload.com/?f=KKCJC5K2